Products Unit Heaters Roof Type Unit Heaters Vertical H-Indoor air / Heating
Vertical H model is a unit specifically developed for structures with ceilings. By its powerful construction and its fan and serpentine operating with high efficiency, it is the optimum solution partner for the circulation of ambient air and for heating. Its installation and investment cost is low. And its installation operation is fast and easy.
Vertical HC-Indoor Air / Heating - Cooling
The difference of Vertical HC Model from the Vertical H Model is its ability to be used for cooling operation. It has cooling serpentine and separator system in addition to that. Moreover the panels of the unit has been manufactured as isolated against condensation, and a drainage has been composed for the condensation occurring at separator.
Vertical HC-Indoor Air / Heating - Cooling
Vertical FHC Model has the ability of providing circulation of air within the environment and operating with mixed air or 100% fresh air by receiving fresh air from the outside through the control of automation products on it. This unit, which is being used for both heating and cooling of the buildings, is especially being implemented at shopping malls and supermarkets.
Vertical FHC- Fresh Air - Indoor Air / Heating - Cooling
Vertical HRHC model units, while performing aspirator operation, enable the transfer of heat value of exhaust air (at rates up to 60%) to the fresh air being blown inside, and thus enable energy saving. This value that is transferred to fresh air, again heat is provided on heating or cooling serpentine within the unit it is provided to the environment from the diffuser in different forms as per the type of heat being provided (heating/cooling).
