Products Floor Convectors Floor Convectors With Fan
The floor convectors with forced convection can either be used as primary heating system or as secondary heating system. High heating capacities has been provided by the addition of fan.
As being used in front of the windows –where the most significant heat loss is realized- at locations having window facades, it helps the heating of the environment and prevents misting of the window. Thermostatic valve or engine valve can be used at the inlet of the battery. In case of having convectors at more than one place at the same location, the room temperature can be fixed to the required value by the room thermostat through the use of engine valve.
Its construction structure includes aluminum casing -as in the products without fan-, heating battery and tangential fan in addition to linear vent. It continues to heat the environment even when the fan does not operate, and it operates at least as effective as the K series.
The tangential fans being used operate at low noise levels. Fans, which have 2 stages as standard, also have 3 stages and vey fast models in special applications. Tangential fans, which have single or double rotor, are used depending on convector lengths.
Special Design Double Serpentine
It can be used when higher heating capacity is required at shorter distance. By providing high heating even when the fan does not operate, enables the environment to remain within the required regime.
It ensures the heating of environment by showing high performance at locations which will be used for the first time and which shall be heated up in a short while.
The only difference from the KFT series is the usage of batteries with larger surface area. Anodized or required linear options can be used as in the other types.
Heating / Cooling
Floor convector with forced convection is being preferred if it will also be used for cooling the environment. Heating and cooling circuits are independent from each other. Convectors, which are being manufactured in 3 different types as per the requirement, can be selected at required lengths.
The only difference from other types is the use of double serpentine and the condensation pan.
Piped floor convectors are being manufactured with fan as standard. The convector capacity changes as per the cold water regime being used in the cooling system.
Mini Series
It adds energy to locations with problematic flooring heights. Mini series floor convectors do not leave any unsolved projects with its special casing structure and with the product finish of 7.7cm height along with linear. The floor convectors with forced convection can either be used as primary heating system or as secondary heating system. High heating capacities has been provided by the addition of fan.
Its construction structure includes aluminum casing -as in the products without fan-, heating battery and tangential fan in addition to linear vent. It continues to heat up the environment even when the fan does not operate.
The tangential fans being used operate at low noise levels. They can be operated in 2 stages. Tangential fans, which have single or double rotor, are used depending on convector lengths.
